全国免费服务热线4009-626-110

业务咨询专线:139-2526-3101谭


3d出号走势图:金宝信LED室内外租赁屏安装说明

2019-09-25 13:25来源:双色球出号走势图 www.inc6.net作者:jbxled网址:双色球出号走势图
文章附图

双色球出号走势图 www.inc6.net LED租赁屏安装说明

1,检查单个屏体的单元箱体数量,日子架、连接片,线材,螺丝数量和尺寸是否符合屏体要求(本屏为P2.604屏,500*500*65mm箱体5*5个拼接),用1+1.5米日子架4套,连接片32个,连接片螺丝128个,箱体之间电源线75cm25条,网线75cm25条,3条主电源线,2条主网线,每条主电源线带8-10个箱体,每条主网线带8-10个箱体。

2,屏体拼装,装屏之前先将每个箱体点亮测试没问题在往上装,先将第一排5个箱体左右用锁扣锁紧,然后后排每隔一个箱体固定一个1.5米日子架,装好与要使用的地方,第一排调水平,后面用连接片和螺丝将箱体于日子架固定,然后装第二排箱体,每隔箱体左右锁紧,与下排箱体也用锁扣锁紧,一次类推装好3排,然后将1米日子架于1.5米日子架连接好,在装上面两排箱体。

3,屏体接线,箱体之间电源线连接按线材和箱体标注符号插线,网线也类同,整屏每两横排用1条主电源线和1条主网线,最上面一排用一条主电源线和主网线。

4,通电调试,通电之前先检查屏体线路是否接错,确认完无误然后通电,连接电脑,在电脑上做好屏体程序,然后发送到屏体上面。

5,屏体使用,具体内容操作发布请参展软件使用说明。

LED rental screen installation instructions

1, check the number of unit housing a single screen, time frame, connector, wire, if the number of screws and conform to the requirements of the screen (the screen for the P2.604 screen, 500 * 500 * 65 mm case 5 * 5 splicing), with 1 + 1.5 meters day 4 sets, connection piece of 32, connection screws 128, power cord article 75 cm25 between casing, line 75 cm25 article, three main power cord, two main lines, each of the main power cord with 8-10 boxes, each main line 8-10 boxes.

2, the screen body assembling, loading screen before each cabinet light test no problem in the jacket, the first row of first five cabinet with lock lock, and then the back every box fixed a time frame, 1.5 meters installed and where to use, the first row of the level, behind the connection plate and screws to fix box in time frame, and then the second row housing, around every cabinet lock, also use lock locking and lower enclosure, an analogy installed 3 row, then 1 m days out of 1.5 m days frame connection, in the above two rows of housing.

3. Wiring of the screen body, the power cord connection between the box body shall be inserted according to the wire and the symbol of the box body, and the network cable shall be similar. One main power cord and one main network cable shall be used in every two horizontal rows of the whole screen, and one main power cord and main network cable shall be used in the top row.

4. Power-on debugging: check whether the circuit of the screen body is connected wrong before power-on, confirm it is correct, then power on, connect the computer, make the screen body program on the computer, and then send it to the screen body.

5, the use of the screen, the specific content of the operation release please show the software use instructions.


友情链接

LED酒店舞台显示屏 | LED租赁全彩显示屏 | 广东省餐饮协会指定酒店专用品牌 | 金宝信LED显示屏方案 | 全球十佳显示屏供应商 |  值得信耐的LED显示屏厂商 |   LED显示屏战略合作伙伴